- - - NOUVELLE Kamikaze Collection ISM Coat 3.0 30ml - - -

FLEXIBLE, HYDROCARBON CERAMIC COATING.

Kamikaze Collection ISM Coat 2.0 blends optically clear hydrocarbons with ceramic components to provide a clear, candy-gloss shine to automotive paintwork. Unlike many ceramic coatings, ISM is free from solvents and volatile organic compounds (VOCs).

Features & Benefits:

• Easy to apply & easy to buff off
• Provides a candy-gloss, reflective shine
• Lasts for 24 - 36 months
• Repels water, dirt & grime
• Can also be used to restore plastic trim
• Designed to resist water spotting better than traditional ceramic coatings
• Non-solvent based & free from Volatile Organic Compounds (VOCs)
• High solids content, 27% organic, 51% inorganic

Directions for use:

• Wash and dry the vehicle.
• Polish to remove any paintwork blemishes prior to sealing.
• Wipe-down with a residue remover.
• Optimum application conditions: 15-25 °C, Humidity 40-70%.
• Using a dropper or pipette, apply a few straight lines of ISM 2.0 onto your applicator cloth.
• Starting with horizontal surfaces first, apply ISM 2.0 in straight lines only (no cross-hatch, no circular application) and slightly overlap from one line to the next. Work in small areas at a time (approx. 24" square).
• Immediately start your removal process otherwise the coating will become difficult to remove and may leave a smeary finish. If this happens, apply more product on top of the affected area and immediately remove.
• Using two different microfibres, for the initial wipe, and for the second wipe.
• Thoroughly wipe down the section to remove the residue. Your first wipe should remove 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal.
• Multiple coats are not necessary.
• Infrared (IR) curing? set lamps at 70-75 °C for 10-15 minutes per panel.
• Keep dry for a minimum of 24 hours and do not wash the vehicle for 7 days.
• Maintain using Kamikaze Collection Over Coat for additional gloss & hydrophobicity.

Technical Specification:

• VOC-free
• Non-solvent based
• Non-flammable
• Durability: 24-36 months
• Water contact angle: 105 degrees
• pH tolerance: 2-11
• Thickness layer: 2 microns
• Hardness: 3-4H (pencil scale)
• Full curing time: 7 days
• Coverage: 30ml = 1-2 cars